Horizon 500w 40/20/10m End Fed Wire Antenna
HORIZON END FED 500w 10M 20M 40M Ham Bands
Thank you for purchasing our Horizon end fed dipole. The antenna is designed and manufactured in Australia and is intended to offer simple and very efficient operation At only 12 metres in length it will easily fit into most installation scenarios. Commercial antennas are rated with a usable VSWR of 2:1 or under. Rating the Horizon End Fed using this method the band width is appropriately 100 kHz at 40m, 300 kHz at 20m and 400 kHz on the 10m band. In most cases this will be fine but if you prefer wider band width or tighter VSWR the addition of a good quality tuner will help.
SPECIFICATION:
10/20/40m bands (Use of a tuner in some installations may allow operation on the other ham bands)
500w SSB PEP, 100w FT8 50% Duty Cycle)
12 metres physical length
Wire used: 1.6mm G304 grade stainless steel
Trap and 49:1 unun winding: All copper
HORIZON END FED 500w 10M 20M 40M Ham Bands
Thank you for purchasing our Horizon end fed dipole. The antenna is designed and manufactured in Australia and is intended to offer simple and very efficient operation At only 12 metres in length it will easily fit into most installation scenarios. Commercial antennas are rated with a usable VSWR of 2:1 or under. Rating the Horizon End Fed using this method the band width is appropriately 100 kHz at 40m, 300 kHz at 20m and 400 kHz on the 10m band. In most cases this will be fine but if you prefer wider band width or tighter VSWR the addition of a good quality tuner will help.
SPECIFICATION:
10/20/40m bands (Use of a tuner in some installations may allow operation on the other ham bands)
500w SSB PEP, 100w FT8 50% Duty Cycle)
12 metres physical length
Wire used: 1.6mm G304 grade stainless steel
Trap and 49:1 unun winding: All copper
HORIZON END FED 500w 10M 20M 40M Ham Bands
Thank you for purchasing our Horizon end fed dipole. The antenna is designed and manufactured in Australia and is intended to offer simple and very efficient operation At only 12 metres in length it will easily fit into most installation scenarios. Commercial antennas are rated with a usable VSWR of 2:1 or under. Rating the Horizon End Fed using this method the band width is appropriately 100 kHz at 40m, 300 kHz at 20m and 400 kHz on the 10m band. In most cases this will be fine but if you prefer wider band width or tighter VSWR the addition of a good quality tuner will help.
SPECIFICATION:
10/20/40m bands (Use of a tuner in some installations may allow operation on the other ham bands)
500w SSB PEP, 100w FT8 50% Duty Cycle)
12 metres physical length
Wire used: 1.6mm G304 grade stainless steel
Trap and 49:1 unun winding: All copper